Cylinder specifications
22mm and 25mm cylinders. The 25mm cylinder is the standard size used most in roller doors.   10mm and 17mm cylinders for the flat door model or other manufacturers' systems.
 
Designs
Roller door mount
Flat door mount
Stop/Go cylinder
 
Latch Installation
1.

Place the new latch on the door and mark the outline of the cylinder hole on the door.

 

2.

Drill out the hole using a 32mm hole cutter attachment to a power drill.

 

3. Attach the new latch using the mounting hardware provided. Note how the mounting screws fit into the recessed holes in the backing plate to prevent scratching as the door goes up and down.
 
Operating principles
Removable by tenant's key only
Can be keyed differently with overlock or keyed alike
Single overlock key renders tenant's key inoperable but will not remove cylinder

 
A program not just a product. Customised marketing support: when you purchase the latch and cylinder system, you don't just get a product, you get an entire program: 
A working counter display model to help you demonstrate the system to your tenants.
 
An exclusive key registry to protect you and your tenants.
 
Exclusive features
Stainless steel construction prevents rust and corrosion. 
Latch guard fits recessed part of roll-up door to prevent prying.
Back plate is flush mounted; no protruding bolts inside the door.
Double hasp for tenants to add their own padlock if required.

Retail Enforcer
replacement cylinder

Assembled and packed in Taiwan.
Front-loaded housing.
Punch resistant.
Red dot overlock system.
Over 10,000 usable key codes.
Key codes can be recorded by tenant and used to order replacement cylinders or extra keys.
Can be keyed to other manufacturers' overlock systems.

< back to menu page

Lock Distributors Unit 19, 12A Loyalty Road North Rocks NSW 2151 Australia
Ph: (02) 9890 3844 Fax: (02) 9630 5701 Email:
sales@lockdistributors.com.au
All material on this website is copyright © — website by: www.thenet.com.au